Quantcast
Channel: Squeezebox : Community : Forums - Logitech Media Server
Viewing all 5293 articles
Browse latest View live

line in support for LMS

$
0
0
> You could install a streaming server on the iDevice (e.g. 'this one'
> (https://itunes.apple.com/us/app/sync...456024805?mt=8)) and use
> LMS as a client for it.


That's interesting... while I never actually investigated this, I thought
Apple did not allow an app to do this. Now I'm wondering even more why
nobody came up with a "stream from my iOS device to LMS" app/extension...

--

Michael

7.7.3 on qnap ts-119

$
0
0
hi,

can you tell me if i can install 7.7.3 on qnap ts-119? or should i download the qpkg version?
now i'm on 7.7.2 and everything works fine, is upgrading worth?

Help with Scanning issues - Newbie

$
0
0
Hi all,

I got on the squeezebox hardware late, got a duet from ebay last week.

I have got eh following set up:

Squeezebox duet
Readynas Duo (SPARC)
BT broadband with Home hub 4 using a gigabit switch


I have managed to connect my Duet up to my amp and gigabit switch using Ethernet and Coax, the Remote is connected using WIFI.

I installed Squeezecenter from the logitech website by following the 3 steps cleansqueeze then install squeezecenter then clean squeeze again.

During install of squeezecenter on readynas the NAS froze overnight so i had to pull the plug the next morning, but the install looked like it worked so i carried on.

I have registered an account on mysqueezebox and used that to log into to squeezecenter on readynas. The remote found the reciever and my NAS drive with no real issue.

I then used the NAS drive config to point to my Music Folder and it started to scan.

Its added about 300 files of around 12k that it found...

I then tried to do a new scan but only for new items, it didnt do anything, then i did a clear and scan and the same files are found no more..

Im a bit stuck now as to what to try to do? Any ideas?

Sorry for long post.. Im not very technical with logs etc so trying to explain what iv done so far..

Unable to install 7.7.3 on mac and unable to uninstall

$
0
0
I'm running Mac 10.8.4 (Mountain Lion), tried to install update 7.7.3, would not install, stopped just over half way, window came up to stop server, opened Preferences and unable to stop server. When I click on Status it shows that the server is starting but it won't start and I"m unable to stop server since it is trying to start. I can't uninstall LMS since you have to stop server and I'm stuck on "the serving is starting" and it won't go to "server is running. Tried about a dozen times, no luck.

Anybody have any suggestions?

Thanks in advance.

Implementing a SoX filter with convert.conf

$
0
0
I have a bit of tinnitus and I'm trying to put together a bit of DIY tinnitus retraining therapy (TRT). Studies have suggested that listening to music with the offending tinnitus frequencies removed helps to reduce the noticeability of tinnitus.

SoX's bandreject filter appears to do exactly what I need it to do. I've figured out how to get SoX to manipulate an individual file. My goal is to figure out how to get SBS to do this on the fly; it appears that a couple of lines in a custom-convert.conf ought to do the trick, but I'm not really sure what I need to modify.

My library is huge and has a mix of mp3 and flac. The Sox line that works for me is:

Code:

sox infile outfile bandreject 11600 1o
This removes one octave (1o) from around the frequency that my tinnitus seems to ring at (11600hz).

Any help is greatly appreciated.

Playlists corrupt. Also scanning videos and pictures even though unchecked.

$
0
0
Running 7.7.3 on an iMac 10.6.8 and iTunes 10.7 as my source library. Numerous problems

1) Even after Run Cleanup and Clear Library and Rescan everything, Home > Playlists shows a very very old set of Playlists that used to be on iTunes but has long been deleted.

2) Also if I go to Home > My Music > iTunes > Playlists then I cannot see the four or five playlists that I have in iTunes

3) If I go to the Logitech Media Server control panel in System Preferences and LIbrary > Media Folders and deselect movies and pictures, LMS still scans them and imports them to its database.

4) If I hit Abort, it aborts but then immediately starts up scanning again.

5) If I try Web Remote Control from the LMS control panel in System Preferences and navigate to a piece of music and then click on the Play icon. Nothing audio comes out.

How to move "All Albums" select to top of web UI?

$
0
0
When you use the web UI to view as follows "Home > Genres > [Genre]" is there any way to have the "All Albums" select appear at the TOP of the list?

I'd be up for some HTML editing if I knew which file to hack.

Home Menu Settings... missing?

$
0
0
I just upgraded to 7.7.3. On my Squeezebox Radio, the home menu is only showing a few things. Under settings > Home menu the only options are Help, Reset To Factory, or Show hidden Items (nothing is in this list). There is no way to show "Podcasts", as an example, in the home menu. My Apps is nowhere to be found so I can't even find "Podcasts" in there and press the + button (which the "Help" section seems to suggest is the only way to add something to the home menu). In the previous version the Home Menu settings there was a list of all things which I could check or uncheck to appear in the Home Menu. What happened to that?

This is happening on my 2 Duet players as well. The things appearing in the Home Menu are randomly different, but the Settings > Home Menu only lists the options mentioned above. Can I set up the home menu somewhere on the web interface?

My media scan is still running, but I don't see why this would effect this.

Anyone know what's going on here?

SB Connection to LMS Server fails after router change

$
0
0
I changed by internet service provider, who, during install, has provided me with a modem/router. All is working fine in the transition to the new wifi signal, except Squeezebox! Here is some of what i know:

Win7 on PC
Win Firewall is on but Squeezebox Server allowed as an exception program for public and private network.
Virus protection software shows the Squeezebox folder as an exception (does not allow virus protection to it)
I can access MYSqueezebox.com
I have turned everything off and started the router/modem, then the computer, then the SBS program and then the Squeezebox
The Squeezebox recognizes the new wifi signal but it is not able to find the server.
The SBS program does not recognize the 4 Squeezeboxes in the house.
In SBS Settings - i found the Server IP address and tried to program the address manually in the SB, but that didn't work and now it no longer seeks to connect to "My Music" but this address, which i think changed when i restarted the machine.
The old ip router/modem are fully disconnected

In any case, i am at wit's end. It seems this should not be so complicated for the SBS to see the new wifi signal and find the server....At least it sees the signal. Is there a modem configuration i am overlooking?

I'd really appreciate some guidance on this one.

alac (Apple Lossless); upnp; decoding failure

$
0
0
Hello,

Would like to be be able to send Apple Lossless files over upnp to a squeezebox radio or touch.

I can send MP3 and Flac files fine.

ALAC files are rejected, this is the error in the server log
Slim::Player::Squeezebox2::statHandler (150) Error: 00:04:20:2c:82:92: Decoder does not support file format, code 0

I installed lame and set it to bitrate limit, but the ALAC files are still rejected.

The Apples Lossless files are stored on a Synology NAS.

In this case the UPNP client is an IOS client (DS Audio) on an iphone. The squeezebox radio and squeezebox touch show up on the list of clients that dsaudio can send files to.

If the files are FLAC or MP3 it works, files are streamed to client.

But if the files are apple losless they are rejected.

Is there a setting that I can change that will make this work?

Thanks

Server Crash: Browsing by Music Folder on Windows 8 LMS 7.8.0

$
0
0
Hello,

Normally I would classify a crash as worse than if the error was ignored. In this case I am not sure as if it had not crashed I would not know the problem.



I think that the problem is files/folders names that are too long because I was able to trim file/folders then everything seems to work.

For browsing using artists/albums etc, all files/folders show up and work.

The problem is when I browse by folder, the server crashes and needs to be restarted manually.

The behavior seems to be the same regardless of whether the files are stored locally or are stored on a NAS (UNC path or files stored physically on the windows box.)

Note: LMS/Squeezebox Server runs correctly on a MAC pointing to the same files stored on a NAS and works when running on the NAS pointing at the same files.

Only on the Windows8 is there a problem.

Yes, the file names are too long but they do work when browsing all methods other than by folder. So can this be fixed.

===
When total song # agree between windows (LMS Server)(songs trimmed) and mac/synology(LMS Server) not trimmed, the "discovering files/folders is off by 1". Windows is 1 more than Mac/Synology.

===
On Windows, before trimming songs/folders, "discovering files/folders" the # that is less by 1, agrees on windows (LMS) Mac/Synology (LMS)

==


===

Before trimming folders/files Windows LMS total song count is 6 less that Mac/Synology (LMS). This might be true, but I have not been able to find any missing songs.

Songs not available through browsing folders due to crash is greater than 6. Those folders and all songs inside are available when browsing by other methods. Those are not the 6 missing, I think

Stopping After First Song

$
0
0
3 players and they all stop after the first song of a playlist or album. Pressing the next button seems to get it back going again to play the rest of the playlist/album.

I completely uninstalled an old version and upgraded to 7.7.4 to see if that would fix it. no dice. The only setting I can see that might effect this is "Play Other Songs In Album" which I've set to "Play other songs..." I did this after resetting each player's settings as well.

Any ideas, sweet people of the internet?

New Scan Stuck... Only Solution to Start All Over?

$
0
0
Seems to be stuck on some bad artwork (?) - this is what is says in the remote control, which hasn't changed in a couple hours...

iTunes Playlist Import (118 of 118) Complete 00:00:56

Pre-caching Artwork (3284 of 5296) Running 14:09:38

Live - Simple Folk Radio

Live - Simple Folk Radio is an album - seems like it might be that. But the Scanner Log shows a complete different album with the error:

Warning: Image::Scale libjpeg error: Corrupt JPEG data: premature end of data segment ((data))

I actually tried to put new art in for both albums using Itunes, but no luck. Do I have to abort scan and do the "Clear Library and..." scan? Or maybe "Look for new..." will start scanning the artwork that it missed when it froze this time?

Ugh. Sorry for spamming the forum. 3 problems with one stupid upgrade.

iTunes import stopped importing any songs

$
0
0
Hi, I have an odd problem, I've been using iTunes import for years now(mainly for ratings data). Earlier this week after adding some new albums to iTunes, and rescanning the library, I noticed it stopped working. In the scanner log, I can see that it parses the iTunes Library.xml file just fine, and it lists out all the tracks in my library, with the correct paths, etc. But when the scan finishes, there are no tracks in my library. The status screen even lists out 14000+ songs imported under the itunes import step, but the overall track count shows 0. Using Database Query, when I select count(*) from tracks, it comes up with 0 as well. It's like it doesn't commit any of songs it found. The only recent change I made was to the setting that controls how artists are listed as part of compilations, but I changed that back, and it didn't change the behavior. It's possible iTunes got upgraded in the last month, but I think i've been on 11.x for a while. I was running 7.7.2 when this first happened, and I upgraded to 7.7.3, with no luck. I am running on a ReadyNas, and used the option to delete the database & cache, but that didn't help either.
I have attached my most recent scan log.
When I compare with an older scan log I have saved, I don't see any of these lines: "Pushing XXXXX on to list: file://XXXXXXX". I've attached the scan log (broken into two parts), anyone have any ideas?

scanner-part1.zip
scanner-part2.zip
Attached Files

where did the Touch settings go?

$
0
0
> I don't see any options in LMS to change screensaver settings anymore.
> Have they been removed from recent LMS builds?


They have never been available from LMS. You'll have to change them on the
device directly.

--

Michael

Automatic Update nag messages

$
0
0
I know this has been covered before (probably many times) but I can't find the relevant threads/posts.

Once a new update has been automatically downloaded, if you don't want to update can you delete the downloaded file to stop the nag messages?

If so, what is the name of the downloaded update file and where is it located?

Thanks

Missing album art

$
0
0
Hi all,

So another missing album art thread. I tried searching but haven't found a solution to my problem.

Basically I have started losing album artwork. I forget the exact circumstances when it started (it was months ago now), but I think it was coincident with adding some new audio files. Now, depending on the player, I have little or no artwork at all.

I have a Touch and Radio connected via a ReadyNAS running LMS. Currently running 7.7.3-r16662 on touch, 7.7.3 on LMS, and 7.7.2-r9663 on the Radio (which for some reason claims to be up to date with this), but the problem was the same before the recent update.

My files are predominontly FLAC with a smattering of MP3s. Generally all have embedded images and a folder.jpg. All images are approx 500 x 500 and not large file sizes. I do not have specific track images, just single album covers. All the tags were set, and embedding done, with various versions of Mp3Tag over the years.

On the LMS web interface on my Laptop only a few images are displayed. On my HTC Phone using Squeeze Controller, the Touch and the Radio, there are no images whatsoeve since updating to 7.7.3. Strangely, the touch no longer displays menu icons for the App Gallery or the radio stations types, but they all appear to work on the Radio.

I've tried clearing and re-scanning the library (before and after the software updates). When it pre-caches artwork it finds roughly the right number of images (240 thumbs for 252 albums, which sounds about right as some albums are duplicates owing to multi-CDs; one or two intentionally have no covers).

I can see no pattern to the missing images. It seems unrelated to music file type, image file type, file size, etc. etc.

I'm starting to pull my hair out over this and these little niggles are causing me to start to fall out of love with the SB product. Can anybody help?

-Dave

How to increase font size in web interface?

$
0
0
Hi, I'm new to this whole thing . . . I use an iPad and an Android to control my squeezeserver. I know I could use iPeng and other software, but I use the web interface/skin as part of a custom iRUle remote control setup and could really use a way to increase the font size since I have rather large fingers.

Can I change the font tags using a web design application?

Jeff

Duplicate Playlists

$
0
0
Hi, I appear to getting a duplicate playlist made every time I now try to add to the original playlist. History of potential impact I had to rebuild my PC, the first time due to a failing external HDD I had to move my music library to a different drive (l: to j: ). However realising that LMS could not now find my playlists I flipped the drive names, so that the music library now resided on the same named drive and same path info. Access to the original Playlists are fine but cannot add, as it just creates a duplicate. Any ideas appreciated.

PS i can work around this by opening both in Notepad and copying the new details to the old and rescan, but not a very good solution moving forward and do not fancy rebuilding a large number of playlists.

Unchecked songs problem with iTunes & LMS

$
0
0
I just put a bunch of CD's into iTunes doing what I always do - imported using the WAV encoder, made a AAC copy of each track (which I unchecked) and rescanned with LMS to capture the changes. All my existing tracks are shown correctly in LMS with only the WAV files listed (checked in iTunes), but the new tracks I just imported are listed twice (WAV & AAC). I have cleared the cache and preferences, done a complete rescan several times and even done a clean install of LMS 7.3.3 - but nothing fixes the problem. Is there now a mismatch between LMS 7.3.3 and iTunes 11.0.5.5 that does not recognize unchecked songs any more :confused:
Viewing all 5293 articles
Browse latest View live


<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>