November 10, 2018, 5:44 am
> I tried to play a playlist with shuffle enabled. All songs get properly
> shuffled. Normally, at the end of a playlist, don't stop music will add
> some songs. I use musicip for this. But with a shuffled playlist, it
> will add some songs, but it will shuffle the playlist again. Making the
> now playing song first in the list.
Are you using plain MIP or Sugarcube?
--
Michael
↧
November 11, 2018, 8:31 am
Sorry if this has been posted/discussed elsewhere but I didn't see it...
Running LMS in Windows 7 for a transporter connected via wifi. Normally works more or less fine (garbled artists name etc. but what else is new) but since yesterday it will not recognize my music folders anymore from my external HD. Scanning for music doesn't access folder there so no music is shown/displayed in media scan detail. It does recognize folders on laptop or USB stick but not from the external HD. Can access external HD without problems via media player (yes, I still use that) or manually but LMS doesn't seem to 'see' the folders. No OS update made (as far as I know) so I am stumped. Any suggestions are welcome...scanned ports (I think) and didn't see anything out of place either. Tried different USB port with same result. Also ran cleanup with no change...
Thanks
↧
↧
November 11, 2018, 3:10 pm
> I'm running LMS 7.9.1 on a Mac, 10.11.6, El Capitain
> Responses point to a possible outdated SSL.
> I updated IO::Socket::SSL to 2.060 and Net::SSLeay to 1.85 but still
> cannot connect.
As outlined before, this is a problem with El Capitan being outdated in
some aspect(s). I tried to pull some of those URLs using curl, and it
failed in similar ways. It might be the openssl implementation used on
El Capitan - in which case updating the Perl modules wouldn't help.
From your previous postings it wasn't clear to me what exactly you
tried: you mentioned a new Perl version as well as updating the two
modules mentioned above. Were these two independent attempts? Maybe you
should look into updating OpenSSL?
And your thread title should be a bit more specific, or it will soon be
"spammed" with lots of totally unrelated issues...
--
Michael
↧
November 11, 2018, 6:09 pm
> Once again after daylight savings the clock on my 2 Touches do not
> display the time. Have looked for solutions here to no avail ?
Connected to LMS? MySB? Restarted the units? Checked the server?
Lack of the most basic information in a request for help is not a big
deal, just annoying.
--
Michael
↧
November 12, 2018, 8:51 am
> Just updated LMS on my QNAP server to
Check its time settings. The SBs will take the time from your server.
--
Michael
↧
↧
November 12, 2018, 10:01 pm
> However, a failed software updated caused me to have to rebuild my
> fusion drive and reinstall a full Time Machine backup. After that, the
> LMS would not start. I did a full uninstall and reinstall of version
Most likely this is a permissions issue on some of the folders LMS uses.
You can download this little automator script to fix them:
https://www.dropbox.com/s/bpx32ytk7y...sions.zip?dl=0
Extract the file, run the script, and try to start LMS again.
--
Michael
↧
November 13, 2018, 1:36 am
Hi, everyone,
How to play on LMS Wavepack (.wv, iso.wv, or .wv+.cue) and SACD ISO?
Are there any plugins available?
↧
November 13, 2018, 9:27 am
Could not find how to add another Picoreplayer to LMS.
Second PCP is online with another IP. How to connect to LMS?
↧
November 13, 2018, 7:15 pm
Using the LMS CLI, is it possible to subscribe to specific playlist events like, playlist newsong, playlist pause, etc. rather than all playlist events? I don't see an example of it in the documentation and I haven't come up with much searching the forum either.
I've tried variations of:
subscribe playlist newsong
subscribe playlist%20newsong
subscribe playlist:newsong
subscribe playlist[newsong]
Etc. just fishing around trying to find a working combination but the command either doesn't do anything at all or it just gives me all playlist events.
Also, is there a difference in the "pause" event and the "playlist pause" event other than what the CLI returns when the event occurs? In other words, when you press pause on a player is that always a pause event *and* a playlist pause event?
↧
↧
November 14, 2018, 7:34 am
This is what I got from yesterdays scan:
server.log
Code:
[18-11-13 22:50:22.0809] main::init (387) Starting Logitech Media Server (v7.9.2, 1541869104, Sat Nov 10 18:20:42 CET 2018) perl 5.024004 - x86_64-linux-thread-multi
[18-11-13 22:50:23.8641] Slim::Utils::SQLiteHelper::postConnect (374) Optimizing DB because of missing or empty sqlite_stat1 table
[18-11-13 22:50:23.8718] Slim::Schema::forceCommit (2147) Warning: Trying to commit transactions before DB is initialized!
[18-11-13 22:50:25.6115] Slim::Utils::SQLiteHelper::postConnect (374) Optimizing DB because of missing or empty sqlite_stat1 table
[18-11-13 22:50:25.6752] Slim::Schema::forceCommit (2147) Warning: Trying to commit transactions before DB is initialized!
[18-11-13 22:50:25.7940] Slim::Utils::SQLiteHelper::postConnect (374) Optimizing DB because of missing or empty sqlite_stat1 table
[18-11-13 22:50:25.8003] Slim::Schema::forceCommit (2147) Warning: Trying to commit transactions before DB is initialized!
[18-11-13 22:50:25.9286] Plugins::CustomScan::Scanner::executeSQLFile (522) Couldn't open: /share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/Cache/InstalledPlugins/Plugins/CustomScan/SQL/SQLite/dbupgrade_valuesort.sql : No such file or directory
[18-11-13 22:50:25.9296] Plugins::CustomScan::Scanner::executeSQLFile (522) Couldn't open: /share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/Cache/InstalledPlugins/Plugins/CustomScan/SQL/SQLite/dbupgrade_extravalue.sql : No such file or directory
[18-11-13 22:50:25.9306] Plugins::CustomScan::Scanner::executeSQLFile (522) Couldn't open: /share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/Cache/InstalledPlugins/Plugins/CustomScan/SQL/SQLite/dbupgrade_valuetype.sql : No such file or directory
[18-11-13 22:50:26.4716] Slim::Utils::SQLiteHelper::postConnect (374) Optimizing DB because of missing or empty sqlite_stat1 table
[18-11-13 22:50:26.4791] Slim::Schema::forceCommit (2147) Warning: Trying to commit transactions before DB is initialized!
[18-11-13 22:50:37.8663] main::checkDataSource (1110) Warning: Schema updated or no media found in the database, initiating scan.
[18-11-13 22:51:10.6012] Slim::Schema::Storage::throw_exception (122) Error: DBI Exception: DBD::SQLite::st execute failed: database is locked [for Statement "UPDATE albums SET title = ?, replay_gain = NULL, replay_peak = NULL, titlesearch = ?, disc = ?, discc = ?, year = ?, artwork = ?, musicbrainz_id = NULL, contributor = ?, compilation = ?, titlesort = ? WHERE id = ?" with ParamValues: 1="Bartók: The 6 String Quartets", 2='BARTOK THE 6 STRING QUARTETS', 3=2, 4=2, 5=2006, 6='1837d819', 7=27, 8=0, 9="BARTÃK THE 6 STRING QUARTETS", 10=3]
[18-11-13 22:51:10.6771] Slim::Schema::Storage::throw_exception (122) Backtrace:
frame 0: Slim::Utils::Log::logBacktrace (/share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/Slim/Schema/Storage.pm line 122)
frame 1: Slim::Schema::Storage::throw_exception (/share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/CPAN/DBIx/Class/Storage/DBI.pm line 1007)
frame 2: DBIx::Class::Storage::DBI::__ANON__ (/share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/Slim/Schema.pm line 3107)
frame 3: Slim::Schema::_updateHash (/share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/Slim/Schema.pm line 1298)
frame 4: Slim::Schema::_createOrUpdateAlbum (/share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/Slim/Schema.pm line 1633)
frame 5: Slim::Schema::_newTrack (/share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/Slim/Schema.pm line 1845)
frame 6: Slim::Schema::updateOrCreateBase (/share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/Slim/Schema.pm line 1709)
frame 7: Slim::Schema::updateOrCreate (/share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/Slim/Formats/Playlists/Base.pm line 54)
frame 8: Slim::Formats::Playlists::Base::_updateMetaData (/share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/Slim/Formats/Playlists/M3U.pm line 182)
frame 9: Slim::Formats::Playlists::M3U::_item (/share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/Slim/Formats/Playlists/M3U.pm line 145)
frame 10: Slim::Formats::Playlists::M3U::read (/share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/Slim/Player/Playlist.pm line 1102)
frame 11: Slim::Player::Playlist::loadClientPlaylist (/share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/Slim/Player/Client.pm line 571)
frame 12: Slim::Player::Client::startup (/share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/Slim/Player/Player.pm line 113)
frame 13: Slim::Player::Player::init (/share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/Slim/Networking/Slimproto.pm line 1152)
frame 14: Slim::Networking::Slimproto::_hello_handler (/share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/Slim/Networking/Slimproto.pm line 410)
frame 15: Slim::Networking::Slimproto::client_readable (/share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/Slim/Networking/IO/Select.pm line 123)
frame 16: (eval) (/share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/Slim/Networking/IO/Select.pm line 119)
frame 17: Slim::Networking::IO::Select::__ANON__ (/share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/Slim/Networking/IO/Select.pm line 168)
frame 18: (eval) (/share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/Slim/Networking/IO/Select.pm line 168)
frame 19: Slim::Networking::IO::Select::loop (/share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/slimserver.pl line 721)
frame 20: main::idle (/share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/slimserver.pl line 677)
frame 21: main::main (/share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/slimserver.pl line 1213)
[18-11-13 22:51:11.5374] Slim::Networking::IO::Select::__ANON__ (131) Error: Select task failed calling Slim::Networking::Slimproto::client_readable: Carp::Clan::__ANON__(): DBI Exception: DBD::SQLite::st execute failed: database is locked [for Statement "UPDATE albums SET title = ?, replay_gain = NULL, replay_peak = NULL, titlesearch = ?, disc = ?, discc = ?, year = ?, artwork = ?, musicbrainz_id = NULL, contributor = ?, compilation = ?, titlesort = ? WHERE id = ?" with ParamValues: 1="Bartók: The 6 String Quartets", 2='BARTOK THE 6 STRING QUARTETS', 3=2, 4=2, 5=2006, 6='1837d819', 7=27, 8=0, 9="BARTÃK THE 6 STRING QUARTETS", 10=3] at /share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/Slim/Schema/Storage.pm line 126
; fh=IO::Socket::INET=GLOB(0x7fa62cdd4d58)
[18-11-13 22:51:11.7346] Slim::Networking::Repositories::__ANON__ (146) Failed to fetch https://repos.squeezecommunity.org/extensions.xml: Timed out waiting for data
[18-11-13 22:51:11.7352] Slim::Networking::Repositories::__ANON__ (149) https lookup failed - trying plain text http instead: http://repos.squeezecommunity.org/extensions.xml
[18-11-13 22:51:11.7421] Slim::Formats::XML::gotErrorViaHTTP (339) Error: getting http://opml.radiotime.com/Index.aspx?partnerId=16
Timed out waiting for data
[18-11-13 22:51:11.7426] Slim::Plugin::InternetRadio::Plugin::_gotRadioError (67) Unable to retrieve radio directory from SN: Timed out waiting for data
[18-11-14 01:41:13.6336] Plugins::CustomScan::Scanner::fullRescan (701) CustomScan: Scanning already in progress, wait until its finished
That Bartók album did not make any problems until now, as far as I know. I
checked the tags and the filenames and compared it to other Bartók albums and found no difference when it came to Bartók spellings.
I upgraded to the latest QLMS (2.02) version and that installed the latest nightly, so I'm not sure what caused what.
↧
November 14, 2018, 10:27 am
> Is there a a way to change the "Total Time" display in the lower right
> corner of the web ui to show Remaining Time, instead? I'm not averse to
> editing config files, if that's required.
No. Not without a lot of effort, probably even server code change.
--
Michael
↧
November 15, 2018, 3:43 am
> Is there a reason that aarch64 has alac and not faad and if so, do I
I guess the reason is as simple as: I didn't get it to work in the
little time I planned to spend on that platform...
You can always try to compile yourself. Sources and patches can be found
on
https://github.com/ralph-irving/faad2/
--
Michael
↧
November 15, 2018, 10:11 am
Not sure what to make of this. I recorded some music with Audacity & then exported it to 320k CBR. It plays in the car, on the mobile, in Windows but won't play in LMS. LMS goes through the motions of playing with the track progress bar ticking along as usual but no sound.
Any ideas?
↧
↧
November 15, 2018, 1:44 pm
Hi,
is it possible to get a random album list with some limitations, e.g. only albums from years 1972 to 1979 an genre contains Rock (*Rock*).
↧
November 15, 2018, 2:21 pm
I just upgraded to Fedora 29. The
http://www.squeezecommunity.org/repo/fedora/ repository does not have a package for 29, so I tried to use the one for Fedora 28, but it fails to install because of a dependancy on perl 5.26.2. Fedora 29 comes with 5.28.
Is there any ETA for a Fedora 29 package?
Does anyone know of a way to (easily) install the Fedora 28 package on Fedora 29?
TIA
↧
November 16, 2018, 5:08 am
> **[18-02-08 21:39:39.5901] main::init (353) Starting Logitech Media
> Server (v7.7.5, 1416570306, Wed Nov 26 23:36:20 PST 2014) perl 5.018002
Get the latest 7.7.6 nightly build, or even better: 7.9.2.
> Hi can someone advise how to COMPLETELY uninstall and re-install *the
> best LMS and Squeezebox Versions *on a Mac air running High Sierra for
> my Logitech Boom.
Why would you want to completely uninstall?
http://wiki.slimdevices.com/index.ph...ations#Mac_OSX
could give you some pointers.
--
Michael
↧
November 18, 2018, 1:01 pm
My Squeezebox players (one Radio, two Touches, one wired, two on wifi) can wake my iMac running LMS 7.9.1 (1522157629, Fri Mar 30 12:22:47 CEST 2018).
However, they cannot KEEP the iMac/LMS awake. My iMac is wired to my router.
The iMac goes back to sleep after about 30 seconds and the music stops on my players after about 70 seconds.
If I re-wake my iMac with a Wake On LAN app on my phone, playing will resume for only another ~70 seconds and my iMac goes back to sleep.
If I set my iMac to "never sleep" in Energy Saver, everything works fine...but it burns through a lot of power 24/7.
My iMac is running 10.13.6; it is an older iMac so it still has separate "computer" and "display" sleep sliders under Energy Saver.
I have adjusted the settings of Prevent System Standby and that does not make any difference.
This is really hard to debug so I am looking for any tips that I can get.
Thanks,
JPEG
↧
↧
November 18, 2018, 2:35 pm
> Is there a way, from the Advanced Search web UI, to include logical
> operators?
>
> E.g. Track name does not start with Link:
That's more excluding than including? No, that's currently not
supported. Should probably "fix" this...
--
Michael
↧
November 18, 2018, 4:51 pm
Maybe this is known, but in case not, I can use this url in a browser to display the correct cover art (notice mac is all caps):
Code:
http://192.168.1.201:9000/music/current/cover?player=B8:27:EB:94:AE:63
But if I wget from the command line the same url it gets a default icon cover art, notice the file size difference between the two requests with the only change being the case of the mac address:
Code:
root@pi3-LMS:/home/tc# wget http://192.168.1.201:9000/music/current/cover?player=B8:27:EB:94:AE:63 -O cover
Connecting to 192.168.1.201:9000 (192.168.1.201:9000)
cover 100% |**********************************************************************************| 30980 0:00:00 ETA
root@pi3-LMS:/home/tc# wget http://192.168.1.201:9000/music/current/cover?player=b8:27:eb:94:ae:63 -O cover
Connecting to 192.168.1.201:9000 (192.168.1.201:9000)
cover 100% |**********************************************************************************| 126k 0:00:00 ETA
The all lower case mac gets the correct cover art.
↧
November 20, 2018, 12:19 am
I do have a growing number of albums in higher sample rates such as 24/96.
When I do play my albums in random titel mix, I do experience something I do not like and wonder if I can fix it.
The situation is as follows:
If the sample rate is going down from one track to another (eg 96 followed by 44.1), some split seconds are missing from the track in 44.1
If the sampe rate is going up, no problem.
Sure, the reason is that the external DAC requires some time to switch from one sample time to another.
Therefore, I did some testing with the setting "Audio Startup Time". But is seems that this feature is not working - at least in my set-up.
I tried different values, but there is no delay.
As alternative I am wondering to resample everything in LMS to the same rate.
Any ideas / suggestions?
↧